50
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM411 · Revised 4/15
www.promega.com
5.D. Quantitating with the Quantus™ Fluorometer
Results from the Quantus™ Fluorometer can be appended to completed run reports on the Maxwell
®
RSC
Instrument.
Setting up the Quantus™ Flurorometer is covered in Section 4.B of this manual.
Refer to the
Quantus
™
Fluorometer Operating Manual
#TM396 for the operating instructions. To
quantitate nucleic acids and generate results that can be added to the run report, the Quantus™ Fluorometer
must be calibrated and used with an appropriate fluorescent dye.
If the Quantus™ Fluorometer is correctly connected and ready to run, the “Q” logo will be displayed in the
upper right corner of the title bar, and the display on the Quantus™ Fluorometer will be active.
Figure 51. Maxwell
®
RSC Home screen.
When the Quantus™ Fluorometer is correctly connected and
ready to run, the “Q” logo is displayed on the upper right corner of the title bar.
Prior to quantification, verify the Quantus™ Fluorometer has the appropriate protocol selected. If the
Quantus™ Fluorometer needs calibration or the mode needs to be changed, consult the
Quantus
™
Fluorometer Operating Manual
#TM396.
12354T
A
