Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
51
www.promega.com
TM411 · Revised 4/15
1. Upon completion of a Maxwell
®
RSC run, the run report will be displayed. To append quantitation
data to an existing Maxwell
®
RSC run report, select
Results
from the Home screen, and of the Results
screen, select the run reports to which quantitation data should be added.
Figure 52. Report View.
Touch the quantitate button in lower left corner to associate quantitation values
read by the Quantus™ Fluorometer with samples from this run.
2. Select
Quantitate
on the lower left side of the screen
3. The Measure Sample Selection screen will display on the Quantus™ Fluorometer.
4. Select the sample you wish to quantitate by tapping the sample number that represents the elution
position on the Maxwell
®
RSC Instrument.
Figure 53. Quantus™ Measurement.
From this screen select the sample position for which you would
like to quantitate the sample with the Quantus™ Fluorometer.
5. Open the Quantus™ Fluorometer lid by pressing down on the lower right corner of the sample lid.
12209T
A
12210T
A
