54
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM411 · Revised 4/15
www.promega.com
5.E. Reports
If sample tracking information was entered, the Report View screen is displayed after the
Open Door
button is pressed. Run reports are also created and stored if sample tracking information is not entered.
These reports can be accessed by selecting the Reports button on the Maxwell
®
RSC Home screen
(Figure 52).
After pressing the
Open Door
button in the Protocol Run window, the Report View screen is displayed
(Figure 56). This screen displays the sample tracking and protocol-specific information for the current
instrument run. Included in this report are the sample tracking information recorded prior to starting the
protocol, the final status of the protocol (Completed or Aborted), the time the protocol run was started, the
length of time the protocol took to process, the operator ID and the Maxwell
®
RSC Instrument details
(software version, firmware version, instrument name, serial number, etc.).
Figure 56. Report View screen.
The Report View screen displays the sample tracking and protocol-
specific information for the current instrument run. Included in this report are the sample tracking
information recorded prior to starting the protocol, the final status of the protocol (Completed or Aborted),
the time the protocol run was started, the length of time the protocol took to process, the operator ID and
additional instrument information. In the lower left corner of the screen is an
Export
button that will be
used for exporting report information.
12230T
A
