Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
53
www.promega.com
TM411 · Revised 4/15
11. Insert the next sample into the Quantus™ Fluorometer as in Step 6 and repeat until all the samples are
quantitated.
12. When all samples have been quantitated, select the
Save
button in the center bottom of the Maxwell
®
RSC screen.
13. A dialog box for the Quantitation parameters will pop up. Enter the kit name of the kit used to quantitate
the sample and a description of the standard used for calibration.
14. When the information has been entered, touch the
OK
button or
Cancel
to go back.
Figure 55. Quantitation Parameters.
Enter the name of the kit used to quantitate the sample and a
description of the standard used for calibration.
15. The quantitation data will be stored, and the run report will be displayed.
12213T
A
