20.D. Removing and Reinstalling the Microplate Sample Tray Cover (continued)
Figure 65. Removing the Microplate Sample Tray Cover.
The arrow points to the
384-well plate adapter.
Installing the Microplate Sample Tray Cover
1. Align the stainless steel pins at a 90° angle to the Tray assembly just in
front of the crescent-shaped tabs (Figure 66).
2. Gently push the Microplate Sample Tray Cover downward until a click is
heard. The click indicates the tray cover has been correctly placed on the
Tray assembly.
Figure 66. Aligning the Microplate Sample Tray Cover.
Promega Corporation ·
2800 Woods Hollow Road
·
Madison, WI 53711-5399 USA
Toll Free in USA 800-356-9526
·
Phone 608-274-4330
·
Fax 608-277-2516
· www.promega.com
Part# TM311
Printed in USA.
Page 76
Revised 5/10
