11.C. Starting a Run (continued)
Figure 35. Setting up a dual absorbance read.
9. Touch the “Door” button again to retract the sample plate back into the
instrument.
10. Touch the “Start” button.
11. To name the results file, touch the “Edit” button to activate a keypad. Enter
the results file name and touch the “OK” button when editing is complete.
12. Touch the “OK” button on the dialog box. The GloMax
®
-Multi+ Detection
System will automatically begin reading samples.
13. To interrupt a reading at any time, touch the “Stop” button.
14. Remove the sample plate after the reading is complete.
Note:
To prevent evaporation and spills, remove the sample plate from the
instrument when the reading is complete.
Promega Corporation ·
2800 Woods Hollow Road
·
Madison, WI 53711-5399 USA
Toll Free in USA 800-356-9526
·
Phone 608-274-4330
·
Fax 608-277-2516
· www.promega.com
Part# TM311
Printed in USA.
Page 40
Revised 5/10
7954T
A
!
