highest versatility without sacrificing performance. The GloMax
®
-Multi+
Detection System can be used as a reader dedicated to a single mode or as a
multimode reader. As your application needs expand, the system can easily
accept the add-on modules, which offer additional detection modes. This
flexibility allows you to customize the system to fit your laboratory needs.
1.A. Inspection
Upon receiving the GloMax
®
-Multi+ Detection System, inspect it carefully for
any damage to the exterior such as scratches and/or dents. Make certain all
accessories are included. Refer to the checklist shipped with the instrument for
order-specific items. Save all packaging materials, if possible, in case the
instrument needs to be returned for service.
Figure 1. The complete GloMax
®
-Multi+ Detection System. A.
GloMax
®
-Multi+
Instrument.
B.
Power cord.
C.
Power Supply Brick, 24V, 150W.
D.
USB Flash Drive,
2GB.
E.
Fluorescence Optical Kit (included with Fluorescence Module).
F.
Luminescence Standard Light Plate (optional).
G.
Non-sterilized black or white
96-well plate.
H.
Waste Collection Tray (included with injector system).
I.
Outlet
Injector Tube Assembly (included with injector system).
J.
DB-15 Serial Cable
(included with injector system).
K
. Injector System (optional).
L
. Two Optical Well
Crosstalk Masks.
M
. Microplate Adapter.
1.B. Setup
1. Place the GloMax
®
-Multi+ Detection System on a flat, level surface. Leave
at least 7.5 inches (19cm) of clearance in front of the instrument to allow the
instrument door to open without hindrance. Position the instrument so that
the touch screen faces outward.
2. Manually open the instrument door and remove the foam packing from the
inside of the instrument. The packing material is used to secure the optical
heads and Microplate Sample Tray during shipping.
Caution:
Remove all of the foam packaging from inside the instrument
before initial power up. Failure to do so may damage the electronics.
Promega Corporation ·
2800 Woods Hollow Road
·
Madison, WI 53711-5399 USA
Toll Free in USA 800-356-9526
·
Phone 608-274-4330
·
Fax 608-277-2516
· www.promega.com
Part# TM311
Printed in USA.
Page 4
Revised 5/10
8043TB
I.
K.
J.
G.
H.
F.
M.
L.
E.
D.
C.
B.
A.
!
