19.B. Event Log
The event log can be downloaded onto a USB flash drive in a .txt format.
Insert a USB flash drive into the USB port, which is located on the front of the
instrument to the left of the touch screen. Touch the “Copy Event Log” button.
The event log cannot be viewed on the GloMax
®
-Multi+ Detection System
touch screen. To view the event log, download the file in .txt format, and open
the log on a PC or Mac computer.
Note:
If the instrument is being controlled by a PC, the event log will be stored
on the hard drive at:
C:\Program Files\Promega\GloMax Multi Plus\EventLog.txt
19.C. Sound Control
The touch screen beeps each time a field is touched. To disable the beep, touch
the “Sound On/Off” button.
19.D. Setting the Time and Date
Touch the “Set Time & Date” button to set the appropriate time and date.
Factory-shipped units are preset to Pacific Standard Time. The GloMax
®
-
Multi+ Detection System does not automatically adjust for daylight savings
time.
19.E. Updating Software
The following instructions are used to update the GloMax
®
-Multi+ Detection
System Graphical User Interface software. The most current software versions
can be obtained from Promega on a CD or via download. Please contact
Promega Technical Services for more information.
1. Load the software onto a USB flash drive.
2. Insert the USB flash drive into the USB port on the front of the GloMax
®
-
Multi+ Detection System.
3. Touch the “Software Update” button, and follow the wizard instructions to
perform the update.
4. The GloMax
®
-Multi+ Detection System will read the USB flash drive,
recognize that a new software version is present, and ask you if this
upgraded software version should now be installed.
Promega Corporation ·
2800 Woods Hollow Road
·
Madison, WI 53711-5399 USA
Toll Free in USA 800-356-9526
·
Phone 608-274-4330
·
Fax 608-277-2516
· www.promega.com
Part# TM311
Printed in USA.
Page 72
Revised 5/10
