Promega Corporation ·
2800 Woods Hollow Road
·
Madison, WI 53711-5399 USA
Toll Free in USA 800-356-9526
·
Phone 608-274-4330
·
Fax 608-277-2516
· www.promega.com
Printed in USA.
Part# TM311
Revised 5/10
Page 45
10. To name the results file, touch the “Edit” button to activate a keypad. Enter
the results file name and touch the OK button when editing is complete.
11. Touch the “OK” button on the dialog screen to save. The GloMax
®
-Multi+
Detection System will initialize and begin the run.
12. To stop a run at any time, touch the “Stop” button.
13. Remove the sample plate after the run is completed.
Note:
To prevent dehydration and spills, remove the sample plate from the
instrument when the reading is completed.
13.D. Switching Fluorescence Optical Kits
1. Close the instrument door by touching the “Door” button. This will ensure
the Microplate Sample Tray is at the Home position.
2. Manually open the instrument door and hold it open with one hand.
3. Gently pull out the Fluorescence Optical Kit found under the Fluor label.
4. Insert a new Fluorescence Optical Kit into the opening by pushing it in
firmly. The label should be facing up and outward.
Figure 38. Installing a Fluorescence Optical Kit.
!
7210T
A
