94
ZONE 2 REMOTE FEATURES
1. IR LED -
Infrared commands that control Zone 2 are
output from this LED. The LED should always be pointed
directly at the IR Sensor in Zone 2. The Zone 2 Remote can
also control Zone 2 using the IR Sensor on the M80 Front
Panel
(Item 8, Page 10)
.
2. POWER (OFF) -
Press this button to turn Zone 2 OFF. Z2:
OFF will appear in the Front Panel Display. If the Main
Room is turned OFF while Zone 2 is ON, Z2: SOURCE will
appear in the Front Panel Display as a reminder that Zone
2 is active. The message will remain on until Zone 2 is
turned OFF or the Main Room is turned ON.
3. SOURCE (Zone 2 ON/Source ) -
With Zone 2 OFF,
the first press of this button will turn Zone 2 ON to the
last source selected in Zone 2. Z2: SOURCE will appear in
the Front Panel Display. If the sources have been named,
(Cable, DVD, etc), the source name will appear in the dis-
play. With Zone 2 ON, press this button to select the next
M80 Source.
SOURCE (Zone 2 ON/Source )-
With Zone 2 OFF, the
first press of this button will turn Zone 2 ON to the last
2
3
4
6
5
1
Diagram 136
Zone 2 Remote Features
MULTIZONE CONFIGURATION
source selected in Zone 2. Z2: SOURCE will appear in the Front Panel Display. If the sources have been named, (Cable, DVD,
etc), the source name will appear in the display. With Zone 2 ON, press this button to select the previous M80 Source.
4.
PRESET -
With the AM/FM or XM Tuner selected, press this button to select the previous programmed Tuner Preset. That is,
if currently on Preset 4, a press of the Preset button will select Preset 3. If Preset 1 is currently selected, the M80 will return
to the highest number programmed Preset. Tuner Preset is not displayed for Zone 2.
PRESET
-
With the AM/FM or XM Tuner selected, press this button to select the next programmed Tuner Preset. That is, if
currently on Preset 4, a press of the Preset button will select Preset 5. After selecting the highest number programmed
Preset, the M80 will return to Preset 1. Tuner Preset is not displayed for Zone 2.
5. MUTE -
With the Zone 2 ON and with any source selected, press this button to cut the amplifier output to the speakers in
Zone 2. (There will be no sound coming from the speakers.) To un-mute the speakers, press the Mute button again. In a mul-
tizone configuration Mute will only mute the Zone 2 speakers. The Main Room will be unaffected. Mute is not displayed for
Zone 2.
Note:
If an external amplifier is connected to the Zone 2 PRE-OUT Jacks, (variable) Mute will also mute/un-mute the external
amp. If an external amplifier is connected to the Zone 2 OUT Jacks, (fixed) Mute will not mute/un-mute the external amp.
6. VOLUME -
With Zone 2 ON press the VOLUME button to turn volume up; press the VOLUME button to turn the
volume down. Zone 2 audio output level is not displayed.
Summary of Contents for M80
Page 1: ...Audio Systems M80 7 1 Channel Surround A V Receiver Installation User Guide ...
Page 7: ...7 notes ...
Page 107: ...107 notes ...
