56
TRIGGER SETUP
Trigger Setup
< >
Trigger Out
Delay
Main
0 s
Diagram 57
Trigger Setup
Trigger Setup
< >
Trigger Out
Delay
Main
0 s
Diagram 58
Trigger Out Delay
1.
With the OSD open, and Setup Menu selected, press
. Source Setup will highlight in the Setup List.
2.
Press three times so Trigger Setup is highlighted in
the Setup List.
Diagram 56
3.
Press . The Trigger Setup screen will appear. Trigger
Out will be highlighted.
4.
Press . The Trigger Out window will become active.
Diagram 57
5.
Press to set Main, Source Setup or Zone 2.
6.
When finished, press so the Trigger Out Window is
no longer active and to save the setting.
Delay
This setting will have the Trigger Out turn ON 0-15 sec-
onds after the mode selected on the Trigger Out line is
turned ON. The Trigger Out will turn OFF instantly when
the selected mode (Main/Source/Zone 2) is turned OFF.
Range:
0-15 seconds
1.
From the Trigger Out line, press so the Delay line is
highlighted.
Diagram 58
2.
Press . The Delay window will become active.
5.
Press to set the duration of the Delay.
6.
When finished, press so the Delay Window is no
longer active and to save the setting.
7.
If continuing in Setup Menu, press to return to the
Setup Menu and proceed to the next section.
8.
To exit the OSD press Menu.
Summary of Contents for M80
Page 1: ...Audio Systems M80 7 1 Channel Surround A V Receiver Installation User Guide ...
Page 7: ...7 notes ...
Page 107: ...107 notes ...
