Proficient Audio Systems M80 Installation & User Manual Download Page 69

Page: 69 / 108

OPERATING ThE M80

xM Tuner

The M80 features a Rear Panel XM Port for connection of an

external XM Ready Satellite Radio Tuner. Once connected

and subscription service has been established, the XM Tuner

can be controlled from the M80 Front Panel or M80 Remote.

XM Tuner metadata will be displayed on the M80 Front Panel

Display and XM Tuner OSD.

Note 1:

XM Tuner metadata is not displayed in Zone 2.

Note 2:

The XM Ready connection requires an external XM

Satellite Radio Tuner that must be purchased separately. XM

Satellite Radio requires subscription service from XM Satellite

Radio to be able to receive program. To activate an XM Satellite

Radio Subscription, call 1.800.XM RADIO (1.800.967.2346)

visit www.xmradio.com and have the Radio ID ready. Please

refer to the instructions provided with the XM Satellite Radio

Tuner for additional information.

Selecting the xM Tuner

With the M80 power ON, repeatedly press the Source but-

ton on the Front Panel until Tuner is selected or press the

Tuner button on the M80 Remote.

Repeatedly press the Tuner or Band button on the M80

Remote to select XM.

When XM is selected, the last tuned XM Channel and

Channel Name will appear in the M80 Front Panel Dis-

play. If the Video Display is ON, the XM OSD will appear

automatically. The XM Category (Neighborhood), Channel

Name, Channel Number, Artist and Song Title and will be

displayed in the OSD.

Diagram 88

If there is a problem with the antenna, CHECK ANTENNA

will appear in the Front Panel Display and OSD as shown

Diagram 89

. If the XM Ready Tuner is not connected

to the XM Port on the M80 Rear Panel, CHECK XM TUNER

will appear in the Front Panel Display and OSD. The OSD

metadata from the XM Tuner may freeze until the problem

is corrected.

xM Search Modes

The M80 provides three Search Modes for tuning XM Chan-

nels: All Channel Search, Category Search and Preset Search.

To select an XM Search Mode:

With the XM Tuner selected, repeatedly press the Menu

button on the M80 Front Panel or Remote until the desired

mode appears in the Front Panel Display. Search Mode

selection is not shown on the XM OSD.

Song

[CH 016] The Highway

PRESET01

Artist

Country

Summertime

Kenny Chesney

Diagram 88

OSD - Tuned XM Channel

Song

[CH 016] The Highway

PRESET01

Artist

CHECK ANTENNA

Summertime

Kenny Chesney

Diagram 89

OSD - Check XM Antenna

M80 Front Panel Display - Tuned XM Channel

M80 Front Panel Display - Check XM Tuner

Summary of Contents for M80













































































































Search results

Summary of Contents for M80

Reviews:

Related manuals for M80

Brands by name

Popular brands

Proficient Audio Systems M80, Installation & User Manual

Search results

Summary of Contents for M80

Reviews:

Related manuals for M80

Brands by name

Popular brands