62
vIdEO SETUP
Picture Setup
< >
Video Modes
Brightness
Contrast
Color
MPEG Noise Reduction
Cross Color Suppressor
Film Mode Detect
Custom
50
50
50
Off
Off
Off
Diagram 74
Video Modes - MPEG Noise Reduction
Picture Setup
< >
Video Modes
Brightness
Contrast
Color
MPEG Noise Reduction
Cross Color Suppressor
Film Mode Detect
Custom
50
50
50
Off
Off
Off
Diagram 75
Video Modes - Cross Color Suppressor
Color
This setting will determine the red, green and blue color
level in the picture. The color level should be natural so
flesh tones look natural, grass is green, sky is blue, etc. Too
little color will make the picture look dull, like TV shows
from the ‘70’s. Too much color will make objects look like
they are ‘glowing’.
1.
Press so Color is highlighted in the Picture Setup
List.
2.
Press . The Color Window will become active.
Dia-
gram 73
3.
Press to set desired level.
Note:
Lower settings will reduce color level, higher
settings will increase color level. Set so picture ap-
pears naturally colored. It can sometimes be helpful
to turn the color all the way off and then bring it up
until objects in the picture appear naturally colored.
4.
To continue in Video Modes, press so the Color
Window is no longer active and to save the setting.
5
. Continue to MPEG or press Menu to exit the OSD.
MPEG Noise Reduction
This setting will determine the level of MPEG Noise Reduc-
tion (MNR). MNR is used to reduce blocking artifacts and
mosquito noise that result from MPEG compression on TV
signals. This type of picture degradation is most notice-
able around titles with a contrasted background and will
appear as blotches.
Options:
Low, Medium, High
1.
Press so MPEG Noise Reduction is highlighted in
the Picture Setup List.
2.
Press . The MPEG Noise Reduction window will
become active.
Diagram 74
3.
Press to set desired level.
Note:
As the amount of MNR is increased, the sharp-
ness of the overall picture may be reduced.
4.
To continue in Video Modes, press so the MPEG
Noise Reduction Window is no longer active and to
save the setting.
5
. Continue to Cross Color or press Menu to exit the
OSD.
Cross Color Suppressor
This setting will turn the Cross Color Suppressor ON/OFF.
This process will eliminate rainbow affects in fine detail
produced by imperfect decoding of composite video. This
affect can be seen in patterned objects such as fences,
clothing, rooftops, etc.
Options:
ON, OFF
Picture Setup
< >
Video Modes
Brightness
Contrast
Color
MPEG Noise Reduction
Cross Color Suppressor
Film Mode Detect
Custom
50
50
50
Off
Off
Off
Diagram 73
Video Modes - Color
Summary of Contents for M80
Page 1: ...Audio Systems M80 7 1 Channel Surround A V Receiver Installation User Guide ...
Page 7: ...7 notes ...
Page 107: ...107 notes ...
