Proficient Audio Systems M80, Installation & User Manual

Page: 46 / 108

46
SOURCE SETUP
Video
This selection will assign the video input on the M80 for
the selected Source. (For example HDMI 1 will be assigned
to Source 1 for video.) Diagram 38
1. Press to move the highlight bar to the Video line.
2. Press . The Video Window will become active.
3. Press to select the appropriate input. (HDMI 1
used for example.)
4. Press OK to save. The video output and OSD will turn
off and then back on when making the change.
5. When finished, press so the Video Window is no
longer active.
Trigger Out
With the Trigger Setup (in the Setup Menu) is set to Source
Setup, this selection will set which source selections will
activate the 12V Trigger Out. The Trigger Out can be used
to activate an external amp, powered subwoofer, screen or
lift in the Main Room when specific sources are selected.
Yes = ON; NONE = OFF Diagram 39
Note 1: There is an additional setting in the Setup Menu
under Trigger Setup that determines whether the Trigger
Out is activated by M80 ON/OFF, Source Setup or Zone 2
ON/OFF. The settings in this section only determine which
sources will activate the Trigger Out when Trigger Out is
set to Source Setup.
1. Press to move the highlight bar to the Trigger Out
line.
2. Press . The Trigger Out Window will become active.
3. Press to select the appropriate setting.
4. When finished, press so the Trigger Out Window is
no longer active and to save the setting.
Source Setup (Normal View)
< >
Source
Name
Analog Audio
Gain
Digital Audio
Video
Trigger Out 1
BLU-RAY
Audio 1
0 dB
HDMI 1
HDMI 1
Yes
Diagram 38
Video Input
Source Setup (Normal View)
< >
Source
Name
Analog Audio
Gain
Digital Audio
Video
Trigger Out 1
BLU-RAY
Audio 1
0 dB
HDMI 1
HDMI 1
Yes
Diagram 39
Trigger Out
Finish Source Setup
Repeat all of the Steps in Source Setup for all connected sources. Make selections as appropriate. Reference the Source Con-
nections Worksheets to confirm input settings.
Tuner (AM/FM/xM)
The internal M80 AM/FM Tuner or an external XM Ready Satellite Radio Tuner connected to the XM Port on the M80 Rear Panel
do not require Source Setup other than Trigger Out. To change the Tuner Trigger Out setting, if not already open, select a
source other than Tuner or iPod and press the Menu button on the M80 Front Panel or Remote. Navigate to the Source Setup,
select Tuner as the source and follow the directions in Trigger Out , above. See sections: Operating the Tuner/Presets and
xM Tuner/Preset Programming to program AM/FM/XM Tuner Presets.
Exit OSD
When finished, press the Menu button to exit the OSD.