Proficient Audio Systems M80, Installation & User Manual

Page: 11 / 108

11
M80 FRONT PANEL FEATURES
7. FRONT PANEL A/V INPUTS - These Front Panel convenience jacks connect to an audio/video device such as a video game,
MP3 Player, still or video camera, etc that is not a regular system component. This eliminates having to pull the receiver out of
its installed position to get to the Rear Panel connections. These inputs are selected by repeatedly pressing the Source button
on the M80 Front Panel or by pressing the 8 button on the M80 Remote . When selected, FRONT will appear in the Front Panel
Display to indicate the selected input. The Front Panel A/V Inputs are configured in the On-Screen Display (OSD) Source Setup
under Source 8.
8. IR SENSOR - (Behind Front Panel Lens) The IR Sensor ‘sees’ the IR control commands output from the M80 Remote Control,
M80 Zone 2 Remote Control, other IR Remote when buttons are pressed on the remote for armchair control of the M80. This
sensor must be kept clear for direct line-of-sight to the remote, or the remote will not be able to control the M80.
9. FRONT PANEL DISPLAY - The Front Panel Display illuminates with receiver status to Source selected, Audio mode, Tuner
information, (frequency, preset, tuned, stereo), Volume level (briefly while volume is being set and for five seconds after), XM
and iPod metadata, Mute and Sleep Timer. The brightness can be set with the Dimmer button on the M80 Remote Control.
The Front Panel Display turns OFF when the M80 is in Standby.
10. CURSOR - After pressing the Main Menu button on the M80 Front Panel or Menu button on the M80 Remote, press these
buttons to navigate the On-Screen Display (OSD) for control, Source Setup and receiver configuration. With the AM/FM or XM
Tuner selected press the buttons to tune channels. Press the buttons to select Preset Channels. For AM/FM, press
OK to select TUNE or PRESET Mode. With an iPod/iPod Dock connected to the MDP jack on the M80 Rear Panel, press the Cur-
sor buttons as is normal for iPod navigation when using the iPod Click Wheel and Center button. The M80 Front Panel Cursor
and M80 Remote Cursor have identical functions in any given mode.
11. VOLUME - With the M80 ON turn this knob to adjust the speaker level audio output. Turn clockwise (right) to turn volume up;
turn counterclockwise (left) to turn the volume down. The audio output level in dB (decibels) will be displayed on the Front
Panel Display while the knob is being turned and for three seconds after a volume adjustment has been made.