19
M80 REMOTE FEATURES
press the Cursor buttons as is normal for iPod navigation when using the iPod Click Wheel and Center button. The M80 Front
Panel Cursor and M80 Remote Cursor have identical functions in any given mode.
49. BACK/ExIT -
Press this button when the On-Screen Display (OSD) is open to step backward in menu navigation or ultimately
exit the OSD.
50. IPOD -
Press these buttons to control an iPod connected to the MDP jack on the M80 Rear Panel.
Note:
This functionality requires use of a Proficient Audio iPod Dock. See section
Connections/iPod
for additional informa-
tion.
51. CLEAR -
With a Preset Channel selected in either the AM or FM Band, press this button to delete the Preset Channel. PRESET
CLEARED will scroll across the Front Panel Display once and the tuner will automatically tune to the next higher Preset Chan-
nel. With a connected XM Ready Tuner selected, and tuned to a Preset, press this button to delete the Preset. ‘X’ DELETED will
appear in the Front Panel Display. (‘X’ = the XM Preset Number.)
52. MEMORY -
With an AM or FM channel tuned, press this button to store it as a Preset. P- - will appear on the Front Panel Dis-
play and flash slowly until the Memory button is pressed again. The tuned channel will be stored to the next unused Preset.
The Display will return to P- - if the Memory button is not pressed within 5 seconds. With an XM channel tuned in Preset
Search mode, press this button to store the channel as a Preset. The next unused Preset Number will appear on the Front
Panel Display until the Memory button is pressed again. The tuned channel will be stored to the next unused Preset. The Dis-
play will return to last selected Preset if the Memory button is not pressed within 5 seconds. Storing a channel on an already
programmed Preset will replace the existing Preset. The M80 can store up to 30 AM, 30 FM and 40 XM Presets.
53. PRESET -
With the AM, FM or XM Tuner selected, a press of this button will select the next previous programmed Tuner Pre-
set. That is, if currently on Preset 4, a press of the Preset button will select Preset 3. If Preset 1 is currently selected, the M80
will return to the highest number programmed Preset. The selected Preset Number is indicated on the Front Panel Display to
the right of the tuned frequency and below the tuned frequency in the Tuner On-Screen Display (OSD).
PRESET -
With the AM, FM or XM Tuner selected, a press of this button will select the next programmed Tuner Preset. That
is, if currently on Preset 4, a press of the Preset button will select Preset 5. After selecting the highest number programmed
Preset, the M80 will return to Preset 1. The selected Preset Number is indicated on the Front Panel Display to the right of the
tuned frequency and below the tuned frequency in the Tuner On-Screen Display (OSD).
54. TUNE -
With either the AM or FM Tuner selected, a press of this button will decrease the tuner frequency by one increment.
If the XM Tuner is selected, a press of this button will select the previous XM channel. If the tuned frequency is also a Preset,
the Preset Number is indicated on the Front Panel Display to the right of the tuned frequency and below the tuned frequency
in the Tuner On-Screen Display (OSD).
TUNE -
With either the AM or FM Tuner selected, a press of this button will increase the tuner frequency by one increment.
If the XM Tuner is selected, a press of this button will select the next higher XM channel. If the tuned frequency is also a Preset,
the Preset Number is indicated on the Front Panel Display to the right of the tuned frequency and below the tuned frequency
in the Tuner On-Screen Display (OSD).
55. FM MODE -
With the FM Tuner selected, press this button to switch the FM Tuner between stereo and mono modes. Typically,
FM Mode should be left in the stereo mode. The mono setting can be useful for cleaning up background noise when tuned to
weak stereo channels. The Front Panel Display will indicate ST for stereo and MN for mono between the tuned frequency and
Preset number. The On Screen Display (OSD) will indicate FM STEREO or FM MONO in the lower left corner.
56. BAND -
With the M80 ON and the Tuner selected, press this button to cycle through the AM, FM and XM Bands.
57. INFO -
With any one of Sources 1, 2, 3, 5, 6, 7 or 8 selected, press this button to open the M80 Information Screen on the Main
Room Video Display. The Information Screen will indicate the Audio Input, Video Input, Speaker Setup (incoming audio signal
configuration), Resolution to Display, Input Audio Format (audio encoding), Listening Mode, Volume and Trigger Out settings
for the currently selected source. ‘OSD INFO’ will appear on the Front Panel Display. Press again to turn the Information Screen
OFF. The Information Screen will not open when AM/FM/XM Tuner or iPod (Source 4) is selected.
Summary of Contents for M80
Page 1: ...Audio Systems M80 7 1 Channel Surround A V Receiver Installation User Guide ...
Page 7: ...7 notes ...
Page 107: ...107 notes ...
