Proficient Audio Systems M80 Installation & User Manual Download Page 68

Page: 68 / 108

OPERATING ThE M80

FM Mode

Press this button on the M80 Remote to switch the FM

Tuner between stereo and mono modes. Typically, FM

Mode should be left in the stereo mode. The mono setting

can be useful for cleaning up background noise when

tuned to weak stereo channels.

When FM Stereo is selected, ST will appear on the up-

per line of the Front Panel Display between the tuned

frequency and Preset Number. The FM STEREO icon

will display in the OSD.

Diagram 85

When FM Mono is selected, MN will appear on the up-

per line of the Front Panel Display between the tuned

frequency and Preset Number. The FM MONO icon will

display in the OSD.

Diagram 85

Presets

The M80 can store up to 30 each AM and FM

Preset Channels.

Presets are stored manually by individually tuning channels

and then saving them as Presets.

Preset Programming

Diagram 86

M80 Front Panel - Programming Presets

Diagram 87

M80 Front Panel - Deleting a Preset

Select the appropriate band and tune an AM or FM Channel to be stored as a Preset.

Press the Memory button on the M80 Remote. If there are still unused Presets for a given band, P- - with the next higher

Preset location will begin to flash slowly on the Front Panel Display.

Diagram 86

Press the Memory button again the tuned channel will be stored as a Preset.

If all Presets for a given band have been used, press the OK button on the M80 Remote so PRESET appears in the Front

Panel Display.

Quickly press the Memory button. P- - and P01 will alternately flash on the Front Panel Display.

Quickly enter the Preset number (1-30) to be replaced. The previously stored channel will be deleted and the currently

tuned channel will be stored.

Delete a Preset

Select the Preset to be deleted.

Press the Clear button on the M80 Remote. ‘Preset Cleared’ will scroll across the Front Panel Display from right to left. The

selected Preset will be deleted.

Diagram 87

Preset Tuning (Manual)

With the AM or FM Tuner selected, press the PRESET buttons on the M80 Remote to select the previous/next pro-

grammed Tuner Preset. The selected Preset Number is indicated on the Front Panel Display to the right of ST/MN. With

Tuner selected, the M80 Front Panel and Remote Cursor buttons can also be used for this function.

Preset Tuning (Direct Numeric)

With the AM or FM Tuner selected, press the OK button on the M80 Remote so PRESET appears on the Front Panel Display.

Press the Numeric buttons to select Preset Channels. To select Preset 1, simply press 1. To select Preset 30, press 3-0. If

there is no Preset programmed to the selected number, the M80 will return to the last tuned channel.

Summary of Contents for M80













































































































Search results

Summary of Contents for M80

Reviews:

Related manuals for M80

Brands by name

Popular brands

Proficient Audio Systems M80, Installation & User Manual

Search results

Summary of Contents for M80

Reviews:

Related manuals for M80

Brands by name

Popular brands