81
OPERATING ThE M80
Listening Mode Setup
Listening Mode
Dolby Setup
DTS Setup
Diagram 114
Listening Mode - DTS Setup
< >
DTS Setup
NEO:6 Music
CenterGain
Dolby Pro Logic II Music
Center Width
Dimension
Panorama
Main
PLII Music
0.2
None
3
0
Off
Diagram 115
DTS NEO:6 Music Center Gain
< >
Dolby Setup
Dolby Digital
Dyn Range Ctrl
Dolby Pro Logic II Music
Center Width
Dimension
Panorama
Main
PLII Music
100%
None
3
0
Off
Diagram 113
Dolby PLII Panorama
Panorama -
This setting creates a deeper or shallower
surround soundfield. The Dolby default is Off. Setting
Panorama to On, creates a more open, ambient mix,
while the Off setting is a more dry mix.
Diagram 113
DTS Setup
This setting allows adjustment of the Center Gain level in DTS
NEO:6 Music mode.
DTS NEO:6 Music Center Gain -
This setting will adjust
the presence of vocals in a NEO:6 Music mix. NEO:6 Music
is often applied to un-encoded content so there is no
encoded reference to center and surround channel levels.
Different two channel (stereo) mixes will create varying
results when processed with NEO:6 Music. The DTS default
is 0.2. Setting a higher number will increase the center
channel level and typically bring vocals up in the mix. As
a result, the surround mix will appear to move toward the
front and sound a little more dry. Setting a lower number
will decrease the center channel level and typically reduce
the ‘focus’ of the vocals. As a result, the surround mix will
appear to move toward the rear and sound more open
and ambient.
Diagram 115
To adjust Dolby and DTS Setups:
1.
With the OSD open, and Setup Menu selected, press .
Source Setup will highlight in the Setup List.
2.
Press four times so Listening Mode Setup is highlighted
in the Setup List.
Diagram 101
3.
Press . The Listening Mode Setup Menu will appear.
Listening Mode will be highlighted.
Diagram 102
4.
Press . Dolby Setup will be highlighted.
Diagram 109
5.
Press . The Dolby Setup Menu will appear. Dynamic
Range Control will be highlighted.
Dolby Digital Dynamic Range
6.
Press . The Dynamic Range Control Window will be-
come active.
Diagram 110
7.
Press to select a Dynamic Range setting in 25% com-
pression increments.
8.
When finished, press so the Dynamic Range Control
Window is no longer active.
Dolby Pro Logic II/IIx Music
9.
Press so the Center Width line is highlighted.
Diagram
111
Repeat
Steps 6-8
above for Center Width, Dimension
and Panorama. Press Menu to exit the OSD when finished.
DTS NEO:6 Music
10.
Follow
Steps 4-8
above selecting DTS Setup in
Step 4
(Diagram 114)
, and adjusting Center Gain in
Steps 5-8
(Diagram 115)
. Press Menu to exit the OSD when finished.
Summary of Contents for M80
Page 1: ...Audio Systems M80 7 1 Channel Surround A V Receiver Installation User Guide ...
Page 7: ...7 notes ...
Page 107: ...107 notes ...
