Proficient Audio Systems M80 Installation & User Manual Download Page 14

Page: 14 / 108

22. AC INPUT -

Connect to the included IEC 2-prong AC Power Cord. After all connections have been made and confirmed, plug

the power cord into an unswitched 110V AC Outlet to power the M80. Contact Proficient Audio Systems for a proper replace-

ment should the AC Power Cord be damaged or misplaced.

23. SVC 1 -

This button is only used during factory M80 firmware updates. Do not press this button. To view the current firmware

version, with AM Tuner selected, press and hold the Surround button on the M80 Front Panel for five seconds. The firmware

version will appear on the Front Panel Display.

24. SVC 2 -

This button is only used during factory HDMI firmware updates. Do not press this button.

25. RESET -

This button is only used during factory M80 firmware updates. Do not press this button. To reset the M80 to factory

defaults, with FM Tuner selected, press and hold the Surround button on the M80 Front Panel for five seconds. This will delete

any user programmed settings including Source Setup, Tuner Presets, Speaker Settings and Listening Mode preferences.

26. IR OUT -

(1 mono 3.5mm mini jack) Connect to the IR IN on a device equipped with an appropriate IR Control Input. These

types of inputs typically accept an IR control signal that has had the IR carrier stripped.

Note:

Devices that feature IR Control Inputs for stripped carrier signals typically have parallel ports that allow daisy chaining

multiple devices.

27. IR IN 1& 2 -

(2 mono 3.5mm mini jacks)

Main Room -

Connect either jack to the standard IR Flasher output of an IR repeater system for main room remote control

without having to use an IR Flasher. This connection also allows the M80 to be controlled via the M80 Remote when the M80 is

hidden in an equipment closet or enclosed cabinet. IR signals received at these inputs can also control any devices controlled

via the IR OUT Jack. (Visit www.proficientaudio.com and select ‘accessories’ for additional information on IR control products.)

Zone 2 -

Connect either jack to the standard IR Flasher output of an IR repeater system for Zone 2 control of the M80 when

used with the M80 Zone 2 Remote. Multizone functionality must be configured in the On Screen Display (OSD) Setup under:

Zone 2 Controls. IR signals received at these inputs can also control any devices controlled via the IR OUT Jack. (Visit www.

proficientaudio.com and select ‘accessories’ for additional information on IR control products.)

28. TRIGGER -

(1 mono 3.5mm mini jack)

Connects to the 12V Control IN Terminal on an external amp or powered subwoofer.

Check amp or sub Control IN polarity and voltage rating before making any connections. (Trigger Out ON = 12VDC) Trigger

Out Polarity: TIP= +12VDC; SLEEVE =GND.

The Trigger jack is governed by one of three setup options:

Source Setup -

The jack turns ON (12VDC)/OFF (0VDC) when any Source configured for YES/NONE on the Source Setup ‘Trig-

ger OUT’ line is selected and the Setup Menu/Trigger Setup ‘Trigger OUT’ is set to Source. The jack turns ON (12VDC) for any

source set to YES. The jack turns OFF (0VDC) for any source set to NONE. This configurability allows voltage controlled sync for

an external device by source.

Main -

The jack turns ON (12VDC)/OFF (0VDC) with M80 ON/OFF Status when the Setup Menu/Trigger Setup ‘Trigger OUT’ is

set to Main.

Zone 2 -

The jack turns ON (12VDC)/OFF (0VDC) with M80 Zone 2 Status when the Setup Menu/Trigger Setup ‘Trigger OUT’ is

set to Zone 2.

M80 REAR PANEL FEATURES

Summary of Contents for M80













































































































Search results

Summary of Contents for M80

Reviews:

Related manuals for M80

Brands by name

Popular brands

Proficient Audio Systems M80, Installation & User Manual

Search results

Summary of Contents for M80

Reviews:

Related manuals for M80

Brands by name

Popular brands