Proficient Audio Systems M80 Installation & User Manual Download Page 67

Page: 67 / 108

OPERATING ThE M80

Operating the Tuner

The M80 features a built-in AM/FM Tuner that allows 30

Preset Channels to be stored for each band. The Tuner can

be controlled for manual tuning or Preset selection from the

M80 Front Panel or M80 Remote. The M80 Remote also allows

direct numeric tuning of channels and Presets.

For information on operating a connected, external XM Ready

Tuner, see section:

xM Tuner

, immediately following.

Selecting the Tuner

With the M80 power ON, repeatedly press the Source but-

ton on the Front Panel until Tuner is selected or press the

Tuner button on the M80 Remote.

The band, frequency, ST/MN (stereo/mono) and Preset

Number (if applicable) of the last tuned channel will

appear in the Front Panel Display as shown in

Dia-

gram 85

. (The lower line of the Front Panel Display

indicates the Listening Mode to the speakers, not the

signal mode of the Tuner.)

If the Video Display is ON the Tuner OSD will appear

on screen as shown in

Diagram 85

If the channel is FM Stereo, FM STEREO will display in

the lower left corner. If the channel is FM Mono or the

FM Mode button has been pressed FM MONO will be

displayed.

If the channel is a Preset, the Preset Number will be

displayed.

Band

Repeatedly press the Tuner or Band button on the M80

Remote to select AM, FM or XM.

Tuning (Manual)

With AM or FM selected, press the Cursor buttons on

the M80 Front Panel or M80 Remote or the TUNE but-

tons on the M80 Remote to decrease or increase the tuner

frequency by one increment. If the tuned frequency is also

a Preset, the Preset Number is indicated on the Front Panel

Display to the right of ST/MN and in the OSD.

Tuning (Direct Numeric)

With the AM or FM Tuner selected, press the

OK button on the M80 Front Panel or M80 Remote so

TUNE appears on the M80 Front Panel Display. Press the

numeric buttons to enter the channel frequency, i.e. 9-5-5

(95.5), 1-0-5-1 (105.1), 1-0-6-7 (106.7), etc. The channel

frequency will appear to the right of TUNE. After three sec-

onds, the tuned frequency will display in the upper line of

the display and the current Listening Mode will re-appear

on the lower line. If the tuned frequency is also a Preset,

the Preset Number will be indicated on the Front Panel

Display to the right of ST/MN and in the OSD.

Diagram 85

Tuner Controls

M80 Front Panel Display - Tuned FM Channel

M80 Remote

FM STEREO

106.70

MHz

PRESET22

M80 Tuner OSD - Tuned FM Channel

M80 Front Panel

M80 Front Panel Display - Direct Numeric Tuning

Summary of Contents for M80













































































































Search results

Summary of Contents for M80

Reviews:

Related manuals for M80

Brands by name

Popular brands

Proficient Audio Systems M80, Installation & User Manual

Search results

Summary of Contents for M80

Reviews:

Related manuals for M80

Brands by name

Popular brands