65
Volume
With the M80 power ON turn the Volume Knob on the M80
Front Panel or press the Volume
buttons on the M80
Remote to adjust the speaker level audio output. Turn clock-
wise (right) to turn volume up; turn counterclockwise (left) to
turn the volume down. The audio output level in dB (decibels)
will be displayed on the Front Panel Display while the knob is
being turned and for three seconds after a volume adjustment
has been made.
Diagram 80
Mute
With the M80 power ON and with any source selected, press
the Mute button on the M80 Remote to cut the amplifier
output to the selected speakers. MUTE will slowly flash on the
Front Panel Display and Video Display, if on. Press the Mute
button again to un-mute the speakers.
Diagram 80
Diagram 80
Volume/Mute
M80 Front Panel
M80 Remote
OPERATING ThE M80
Diagram 81
M80 Remote Tone Controls
M80 Remote
M80 Front Panel Display - Tone Controls
Tone Controls - M80 Remote
The Tone Controls can be changed from the M80 Remote
without using the OSD. This option is useful if the M80 is
being used in an audio only mode and the Video Display
is turned off or if activating the OSD will interfere with
the Video being played. Tone Control changes from the
remote will be displayed on the Front Panel Display as
shown in
Diagram 81.
1.
Press the Tone button on the M80 Remote. The Tone
Active message will appear on the Front Panel Dis-
play.
2.
Press the Tone button again. The Treble setting mes-
sage will appear on the Front Panel Display.
3.
Press Volume to adjust Treble.
4.
Repeat
Steps 2-3
for the Bass setting.
5.
The Front Panel message will turn off 5 seconds after
the last tone adjustment is made and return to normal
mode, typically indicating the Listening Mode.
6.
To turn Tone Controls OFF, press the Tone button until
the Tone Defeat message appears on the Front Panel
Display.
Summary of Contents for M80
Page 1: ...Audio Systems M80 7 1 Channel Surround A V Receiver Installation User Guide ...
Page 7: ...7 notes ...
Page 107: ...107 notes ...
