88
MULTIZONE CONFIGURATION
ZONE 2 TV/VIDEO DISPLAY CONNECTIONS
If using a TV or Video Display in Zone 2, connect it to the
ZONE 2 Composite or S-Video OUT on the M80 Rear Panel
as shown in
Diagram 123
. Connect both, if appropriate.
Note:
All A/V sources must be connected to the M80 via
composite or S-Video for output to Zone 2. A source con-
nected with composite video will only output through
the Zone 2 Composite OUT. A source connected with
S-Video will only output through the Zone 2 S-Video OUT.
The composite or S-Video input must be selected as the
Video Input in Source Setup, for that source to feed video
to Zone 2.
This will also become the video input for the
Main Room.
Composite Video
1.
Using RG6 cable terminated with RCA plugs, connect
the ZONE 2 Composite Video OUT on the M80 to an
appropriate Composite Video Input on the Zone 2
Video Display as shown in
Diagram 123
.
S-Video
1.
Using S-Video cable terminated with S-Video plugs,
connect the ZONE 2 S-Video OUT on the M80 to an
appropriate S-Video Input on the Video Display as
shown in
Diagram 123
.
Line Level Audio (Option)
1.
Using shielded audio cable terminated with RCA
plugs, connect the ZONE 2 OUT or PRE-OUT on the
M80 to appropriate line level audio Inputs on the
Zone 2 Video Display as shown in
Diagram 123
.
ZONE 2 IR CONTROL CONNECTIONS
The Flasher Output of an IR control system can be con-
nected to IR IN 1 or IR IN 2 on the M80 Rear Panel. This al-
lows the M80 to be controlled from Zone 2 using the Zone
2 Remote Control.
Diagram 124
shows an application where IR IN 2 is con-
nected to a Proficient IR Control System. These connec-
tions allow remote control of Zone 2 ON/OFF, source
selection, volume, mute and Tuner Preset selection.
The M80 Zone 2 Remote controls the M80 Zone 2 func-
tions. It may be desirable to teach the Zone 2 IR com-
mands to a universal learning remote that will be able to
control the Zone 2 functions, Zone 2 Video Display and
source components connected to the M80.
1.
Using a mono mini-mini cable, connect the Flasher
OUT on a Proficient IR Router to the IR IN 1 or 2 jack on
the M80 Rear Panel.
2.
See section:
IR IN/OUT Connections
on
Page 38
for
connection instructions for controlling the source
components.
L
R
V
VIDEO DISPLAY
Video Display
Composite Video IN
Video Display
S-Video IN
S-Video Cable
Composite Video
Cable (RG6)
M80
ZONE 2 VIDEO DISPLAY
Zone 2
Main Room
Shielded Audio
Cable (Option)
Video Display
Line Level Audio IN
R
L
Diagram 123
Zone 2 TV/Video Display Connections
Remote Control
FLASHERS
ST
ATUS IN
5-24V DC
IR
RCVR
12V DC
RE
G
U
LA
TE
D
FLASHERS
+12V
GND
ST OUT
IR IN
IR Router
IR Router
Flasher Out
IR Power
Supply
IR Shelf Top
Receiver
IR IN 2
Mono Mini to
Mono Mini Cable
M80
Zone 2
Main Room
Diagram 124
Zone 2 IR Control Connections
Visit www.proficientaudio.com and
select ‘Accessories’ for information
and specifications of Proficient IR
Control Products.
Summary of Contents for M80
Page 1: ...Audio Systems M80 7 1 Channel Surround A V Receiver Installation User Guide ...
Page 7: ...7 notes ...
Page 107: ...107 notes ...
