Printronix P6000L, User'S Reference Manual

Page: 223 / 234

D-1 Appendix
APPENDIX D
Control Code Cross Reference
The following lists present the programming control codes alphabetically by function and alphabetically by code.
In the Programming chapter, an alphabetical list of control code functions is presented with more detailed
information on each control code.
Alphabetical by Function
Function P-Series Serial Page
Backspace N/A BS 6-5
Bell BEL BEL 6-6
Bit Image Mode, Double Density N/A ESC L 6-8
Bit Image Mode, Dbl Density Dbl Speed N/A ESC Y 6-9
Bit Image Mode, Quadruple Density N/A ESC Z 6-10
Bit Image Mode, Single Density N/A ESC K 6-7
Bold Print SOH G ESC G 6-11
Bold Print Reset SOH H ESC H 6-12
Cancel N/A CAN 6-13
Carriage Return CR CR 6-14
Character Set Select (Control Codes) SOH 7 ESC 7 6-15
Character Set Select (Printable Symbols) SOH 6 ESC 6 6-16
Condensed Print N/A [ ESC SI 6-17
Condensed Print Reset N/A [ DC2 6-18
Elongated (Double High) Print SOH d (or BS) ESC d 6-19
Emphasized Print SOH E ESC E 6-20
Emphasized Print Reset SOH F ESC F 6-21
Even Dot Plot EOT N/A 6-43
EVFU Commands (P-Series) DLE-US N/A 6-22
Expanded (Double Wide) Print SOH W ESC W 6-23
Expanded (Dbl Wide) Print, One Line N/A SO 6-24
Extended Character Set SO ESC 4 6-25
Extended Character Set Cancel SI ESC 5 6-26
Form Feed FF FF 6-27
Forms Length Set (Inches) N/A [ ESC C 0 6-28
Forms Length Set (Lines) N/A [ ESC C 6-29
Horizontal Tab HT HT 6-30
Horizontal Tab Set SOH D ESC D 6-31
International Character Select SOH R ESC R 6-32
Line Feed LF LF 6-33
Line Feed n/216 Inch N/A ESC J 6-34
Line Spacing 1/6 Inch (6 lpi) SOH 2 ESC 2 6-35
Line Spacing 1/8 Inch (8 lpi) SOH 0 ESC 0 6-36
Line Spacing 8 LPI (1 line only) ACK N/A [ 6-37
Line Spacing 7/72 Inch N/A ESC 1 6-38
[ NOTE: These functions are available using another control code sequence or control
panel selections.