Printek FP5000 series, User Manual

Page: 103 / 201

The Menu User guide
90
Activation of automatic sheet
feeder (AutoASF) This parameter only appears if an optional automatic sheet feeder is
installed. This feature is only available for the option ASF-R. It reg-
ulates the activation of automatic sheet feeders when there is no
more paper left in one of them.
The single sheet feeders front (ASF-F) and rear (ASF-1/2, two
bins) are available as options for some printer models only.
Press AutoASF (3) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: Off/On
Default Setting: Off
If an ASF is installed and the Off parameter is activated, only the se-
lected source is supported (either via the menu or an ESC se-
quence). If the selected paper source is empty, printing stops.
If an ASF is installed and you select On , the printer will load paper
from the other source if the selected one is empty.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Setting the left margin
(LeftMrg)
The left print margin can be set to a fixed value.
Press LeftMrg (2) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options: 0–134/10“
Default Setting: 0/10“
The value may not exceed the RightMrg value.
Confirm the setting by pressing the Set key (1).
AutoTra AutoASF
Online
Setup
2 1 3 4
Back Next
AutoASF=Off *
Online
Setup
Set < > Exit
2 1 3 4
LeftMrg RightMrg
Online
Setup
2 1 3 4
Back Next
LeftMrg=0/10 *
Online
Setup
Set < > Exit
2 1 3 4