Printek FP5000 series, User Manual

Page: 74 / 201

User guide The Menu
61
Menu parameters
The following section introduces and explains all the possible menu
settings.
Press Setup key.
Press Form (1) key.
Setup mode and Menu mode may be disabled. Hold
down the
Setup key while switching on the printer to
enable menu mode. If you want to enable access to this
mode permanently, you need to change the appropriate
setting in the menu; see
Form lock (FrmLock) (page 80) .
Printing out menu
configurations (Print)
Prints the menu configurations using the active paper feed; see
Menu settings (example) (page 93) .
Press Print (2) key, to start the printout.
Loading menu
configurations (Form)
A menu is loaded, you can choose between five menus; see Menu
handling (page 57) .
Press Form (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Load Form=0/1/2/3/4/5/6/7
Default Setting: Load Form=0
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Online Trac1
Tear
Online
Setup
1 2 3 4
Adjust Paperway
Form
Char Online
Setup
1 2 3 4
Print Form
Online
Setup
Back Next
1 2
3
4
Print Form
Online
Setup
Back Next
2 1 3 4
Load Form=1 *
Online
Setup
Set < > Exit
2 1 3 4