Printek FP5000 series, User Manual

Page: 161 / 201

Emulations User guide
148
List of available control
codes
The following table shows sequences marked by a
3
if they are avail-
able in the various emulations. The MTPL sequences can be used
within all emulation modes. The corresponding sequences are
marked by a
]
.
If you want to know more about control codes, we recommend
our
Programmer’s Application Manual .
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function
P!
P! P! P! <BEL> Signal tone
P!
P! P! P! P!
<BS> Control character BS (Backspace)
P!
P! <CAN> Deleting a data line
P!
P! P! P! P! <CR> Control character CR (Carriage return)
P!
<CSI> Start character for MTPL sequences, corr. ESC [
P!
P! <DC1> Selecting the printer
P!
P!
<DC2> Condensed printing OFF (set by <Sl> or <ESC><Sl>)
P!
P! <DC3> Deselecting the printer
P!
P! <DC4> Double-wide printing OFF (set by <SO> or
<ESC><SO>)
P!
P! ô! P! P! <DEL> Delete line. Epson: Delete last character
P!
P! P! P! P!
<ESC> Start character for programming sequence
P!
P! P! P! <ESC>!<n> Print mode selection
P!
P! P! <ESC># Bit 8 = unchanged
P!
P! <ESC>$<n1><n2> Perform absolute horizontal step
P!
P! <ESC>%<0><0> Select ROM character generator
P!
P!
<ESC>%<1><0> Select download generator
P!
ô! ô! ô! ô! <ESC>%1<n1><n2> Graphics print with 180 dpi/HQ
P!
ô! ô! ô! ô! <ESC>%2<n1><n2> Graphics print with 360 dpi/HQ
P!
ô! ô! ô! ô! <ESC>%3<n1> <n2> Graphics print with 60 dpi
P!
ô! ô! ô! ô! <ESC>%4<n1> <n2> Graphics print with 120 dpi
P!
ô! ô! ô! ô!
<ESC>%5<n1> <n2> Graphics print with 80 dpi
P!
ô! ô! ô! ô! <ESC>%7<n1> <n2> Graphics print with 240 dpi
P!
ô! ô! ô! ô! <ESC>%8<n1> <n2> Graphics print with 72 dpi
P!
ô! ô! ô! ô!
<ESC>%9<n1><n2> Graphics print with 90 dpi
P!
P! <ESC>&<s><x><y>.. Define download character
P!
ô! ô! ô! ô! <ESC>(& Character set ISO 8859-2
P!
ô! ô! ô! ô! <ESC>(* Character set ISO 8859-5
P!
ô! ô! ô! ô! <ESC>(+ Character set ISO 8859-1 SAP
P!
ô! ô! ô! ô!
<ESC>(. Character set ISO 8859-9