2. Reinstall the wheel truck onto the Stairarm Spindle:
a. Clean the Stairarm mounting hardware including: the wheel truck assy
-
spindle sleeve mounting hole, the spindle sleeve
(inside & outside), and the
Stairarm spindle
mount of all grease and dirt.
b. Then apply a thin coat of Super Lube
®
with Teflon® grease to the inside and out-
side of the spindle sleeve
and install onto the Stairarm spindle
.
c. Reinstall the wheel truck assembly
over the spindle sleeve
onto the Stair-
arm spindle
. Secure using a new 9/16” Nylock set screw mounting bolt
and torque to 300 +/- 90 in-lbs (34 +/- 10 Nm). Only use a new 9/16” Nylock set
screw mounting bolt
, do not reuse the removed bolt.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 166
6 Replacement Procedures
Wheel Truck Replacement
