DIAGNOSTIC TEST
TEST DESCRIPTION
KEYBOARD TEST
An illuminated LED map of the function keys will be shown.
Press each individual key and verify that the corresponding LED
extinguishes. Press and hold
BACK
to exit the test.
PVS
1
KEY TEST
Not used, OEM test.
HEART RATE
Tests the unfiltered, filtered, and pulse heart rate. Grasp the
grips to test the hand held heart rate. Use a Polar heart rate sim-
ulator to test the wireless heart rate. Press the
BACK
button to
exit this test.
ACTIVE STATUS
LIGHT
(1)(2)
The current
ASL
2
status light state (blue. pulsing blue, yellow, &
pulsing yellow).
AS LIGHT
BRIGHTNESS
(1)(2)
Sets the ASL light brightness level and ON/OFF state: HIGH.
MED, LOW, and ON/OFF.
RPM TEST
(
EFX
3
only) menu:
MACHINE TEST
>
RPM TEST
The current RPM (revolutions per Minute) value. The SPM
(strides per minute) is equal to 2 X RPM.
CROSSRAMP TEST
menu:
MACHINE TEST
>
CROSSRAMP TEST
(EFX,
AMT
4
Only)
Allows lift command operation during an active lift error condition
(E40, E42, E45, E46) even if the lift is out of range, jammed, or
otherwise disabled due to an error condition.
CAUTION
: DO NOT jam the crossramp while operating in error
mode - There are no software position limit stops in this mode.
BATTERY TEST
menu:
MACHINE TEST
>
BATTERY TEST
(EFX 800 only)
Shows the current battery voltage level as "XX.X VDC Y".
Where:
XX.X is the measured
DC
5
battery voltage (nominal 12.6 - 14.6
Vdc).
Y suffix definitions:
1
Personal Viewing System display.
2
Active Status Light: Service and maintenance status light.
3
Elliptical Fitness Crosstrainer
4
Adaptive Motion Trainer
5
Direct Current: electrical current that only flows in one direction.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 26
4 Standard Service Menus
LED Console Standard Service Menus
