5. Reconnect either the disconnected battery negative terminal or the Lift Motor input
power/control cable.
6. Select
QUICKSTART
and operate the elliptical at
INCLINE
level 1 and
RESISTANCE
level 1 at 130 strides per minute for two minutes, or longer, while listening for wheel
squeak or other unusual noises.
a. If there are wheel squeaking noises, remove the wheel truck and apply a thin coat
of Swix UR10 Yellow Bio Racing ski wax (or equivalent) to the wheel contact
area of the Ramp tracks. Rub the wax back and forth across the track several
times.
b. Operate the elliptical at
INCLINE
level 1 and
RESISTANCE
level 1 at 130
strides per minute for two minutes or more to break in the wax.
c. Verify that there were no wheel noises during the wax break-in period. If there
were noises, visually inspect the Ramp tracks to confirm wax coverage across
the entire wheel contact path and repeat the wax application if needed.
d. Gently wipe away any excess wax with a clean rag.
7. Verify operation and return to service, see
"Operation Verification" on page 14
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 168
6 Replacement Procedures
Wheel Truck Replacement
