3. Remove the right Stairarm, see
"Stairarm Replacement" on page 147
.
4. Use a 1/2" socket to loosen the two Generator/Eddy Brake assembly and the two Drive
Components assembly carriage bolt nuts (left side). Loosen the nuts just enough to
allow movement but keep the carriage bolt heads inserted into the adjustment slots. Do
not remove the fastener nuts.
5. Use a 1/2" socket to loosen the first stage belt tensioner and walk the first stage drive
belt off the input drive and smaller Step-up Pulley/Tensioner assembly pulleys. Remove
the first stage drive belt.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 91
6 Replacement Procedures
Second Stage Drive Belt Replacement
