Tools and Supplies
Tools and supplies required to complete the machine service and repair.
Tools
US and Metric Hex Key set
Standard and Phillips screw driver set
US SAE and Metric Wrench set
External 0.047" Retaining Ring Pliers
Torque
1
wrench
DVM Multimeter
US SAE and Metric socket set
Belt Tension Gauge (recommended Kent-Moore BT-
33-73-F)
US SAE and Metric Hex Key Socket
Bit set
Supplies
Super Lube Gel with Teflon by Permatex
Cleaning rags
Mobil 1, NLGI 2 Teflon Synthetic Grease
Cleaner Degreaser (Simple Green)
Loctite 243 Blue Medium Strength Thread-
locker
Cable ties (1- 3/4", 3", 4" lengths)
Specifications
Fastener Torque Specification
System component fastener torque specification:
System Component
Specification
RF
2
coax connector
2.4 in-lbs (0.271 Nm)
Display fasteners
180 in-lbs (20 Nm
Set screws
300 in-lbs (34 Nm)
1
Torque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut
example: 5 NM torque is equivalent to 5 newton's of force applied one meter from the center of
the bolt, 6 ft-lb is equivalent to 6 lbs of force applied 1 foot away from the center of the bolt.
2
Radio Frequency: Identifies electromagnetic signals with frequency spectrum between the 3
kHz (3,000 hertz) to 300 GHz (300 billion hertz) range.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 10
2 General Information
Tools and Supplies
