6. Remove the two 9/16" bolts (2x) and washers (2x) that secure the ramp to the lift yoke
and remove the ramp. Take care to hold the ramp while removing the fasteners
because the ramp will fall from the yoke when the fasteners are removed. Retain part(s)
and/or fastener(s) for installation.
Ramp Pivot hinge Removal
7. Remove the left and right 3/4" (19 mm) ramp pivot hinge Nylock bolts (2x), flat washers
(2x), spacers (2x) and remove the Ramp Pivot Hinge. Discard the pivot hinge Nylock
bolts and retain the flat washers.
CAUTION
: Do not reuse the Ramp Pivot Hinge Nylock patch bolts for installation.
Discard the used bolts and order new bolts for installation (see
,
bubble # 361).
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 173
6 Replacement Procedures
Ramp Replacement
