ASL States
The ASL utilizes a combination of blue and yellow lights to indicate the current operational
machine status.
ASL State
DESCRIPTION
OFF
The unit is powered OFF or there is no power to the LPCA or some other
hard failure. On P10, P30, P30i and P31 consoles the ASL brightness is
set to OFF.
Blue Solid
Normal operation Indicates that the ASL has not detected any logged
error codes.
Blue Pulsing
Preventative maintenance reminder.
Treadmills: A belt rating of 0 or 1 will cause a blue pulsing ASL light indic-
ating that there is a problem with the running belt/deck and is in need of
servicing or replacement.
Ellipticals: The maintenance counter starts at 1000 hours and counts
down the active use hours to 0. When the counter reaches zero hours,
the ASL will begin pulsing blue indicating preventative maintenance is
due.
Yellow Solid
Indicates an error has occurred, was self-corrected and the machine can
be used. The fault can be cleared.
Yellow Pulsing
There is a current non-recoverable fault condition, there is a loss of a
major function and the machine is out-of-service. Machine service is
required.
ASL Settings and Functions
Setting the ASL light brightness level
The ASL Light Brightness level settings are HIGH, MEDIUM, and LOW. On P10, P30, P30i
and P31 consoles, the light brightness level can be switched OFF.
Contact Precor Customer Support at [email protected] or 800.786.8404 with
any questions.
Page 192
7 Troubleshooting
Active Status Light (ASL)
