Polaris 2010 OUTLAW 450 MXR Page 162 Owner'S Manual Download

Page: 162 / 212

158

Maintenance

Cleaning

Keeping your vehicle clean will not only improve its appearance but it can also extend the

life of various components.

NOTICE:

High water pressure may damage components. Polaris recommends washing the vehicle by

hand or with a garden hose, using mild soap.
Certain products, including insect repellents and chemicals, will damage plastic surfaces.

Do not allow these types of products to contact the vehicle.

Washing the Vehicle

The best and safest way to clean your Polaris vehicle is with a garden hose and a pail of mild

soap and water.
1. Use a professional-type washing cloth, cleaning the upper body first and the lower parts

last.

2. Rinse with clean water frequently.
3. Dry surfaces with a chamois to prevent water spots.

Summary of Contents for 2010 OUTLAW 450 MXR





















































































































































































































Search results

Summary of Contents for 2010 OUTLAW 450 MXR

Reviews:

Related manuals for 2010 OUTLAW 450 MXR

Brands by name

Popular brands

Polaris 2010 OUTLAW 450 MXR, Owner'S Manual

Search results

Summary of Contents for 2010 OUTLAW 450 MXR

Reviews:

Related manuals for 2010 OUTLAW 450 MXR

Brands by name

Popular brands