Polaris 2010 OUTLAW 450 MXR Page 19 Owner'S Manual Download

Page: 19 / 212

Safety

Safety Warnings

Failure to operate the ATV properly can result in a collision, loss of control, accident or overturn, which

may result in serious injury or death. Heed all safety warnings outlined in this section of the owner’s

manual. See the OPERATION section of the owner’s manual for proper operating procedures.

Operator Restrictions/Age Restrictions

This vehicle is an ADULT VEHICLE ONLY. Operation is prohibited for

anyone under 16 years of age. This category S (Sport) ATV is a high

performance vehicle intended for off road use only, for sport-type

recreation and for competitive use by operators with advanced skills

and substantial experience.
Even though a child may be within the recommended age group for

operating some ATVs, he/she may not have the skills, abilities, or

judgment needed to operate an ATV safely and could be susceptible to

accident or injury.

WARNING

Summary of Contents for 2010 OUTLAW 450 MXR





















































































































































































































Search results

Summary of Contents for 2010 OUTLAW 450 MXR

Reviews:

Related manuals for 2010 OUTLAW 450 MXR

Brands by name

Popular brands

Polaris 2010 OUTLAW 450 MXR, Owner'S Manual

Search results

Summary of Contents for 2010 OUTLAW 450 MXR

Reviews:

Related manuals for 2010 OUTLAW 450 MXR

Brands by name

Popular brands