Polaris 2010 OUTLAW 450 MXR Page 139 Owner'S Manual Download

Page: 139 / 212

135

Maintenance

Tires

Operating your ATV with worn tires, improperly inflated tires, non-standard tires or improperly installed

tires will affect vehicle handling and could cause an accident resulting in serious injury or death. Always

follow all tire maintenance procedures as outlined in this manual and on the labels on the vehicle.

Always use original equipment size and type when replacing tires. Always ensure that all nuts are

torqued to specification.

Tire Tread Depth

Always replace tires when tread depth is

worn to 1/8" (3 mm) or less.

WARNING

1/8" (3 mm)

Summary of Contents for 2010 OUTLAW 450 MXR





















































































































































































































Search results

Summary of Contents for 2010 OUTLAW 450 MXR

Reviews:

Related manuals for 2010 OUTLAW 450 MXR

Brands by name

Popular brands

Polaris 2010 OUTLAW 450 MXR, Owner'S Manual

Search results

Summary of Contents for 2010 OUTLAW 450 MXR

Reviews:

Related manuals for 2010 OUTLAW 450 MXR

Brands by name

Popular brands