miroINSTANT Video 5 and Adobe Premiere 5.1
91
S
YSTEM
R
EQUIREMENTS
To make use of miroINSTANT Video 5 you need a PC system that fulfills both
the system requirements for running Adobe Premiere 5.1 (see Adobe
documentation) and the requirements for running your miroVIDEO DC30
series board.
The following boards are supported:
miroVIDEO DC30 with connected SmartCable
*
, included in the delivery
scope of the miroVIDEO Productivity Pack
miroVIDEO DC30 SPEED (Germany only)
miroVIDEO DC30 plus
miroVIDEO DC30 pro (USA only).
You also need a graphics board that is capable of showing video overlay in
combination with your miroVIDEO editing board.
H
OW TO MAKE IT WORK
?
In order to use miroINSTANT Video 5, you must have installed three things in
your PC:
A Pinnacle video editing board that supports INSTANT Video 5, like the
miroVIDEO DC30 series.
Adobe Premiere 5.1.
Driver software for the video editing board that supports and includes
INSTANT Video 5.
Please see the detailed install information that comes with your video editing
board and drivers in the release notes and this User’s Guide.
There you will learn about the requirement to remove other editing boards and
old drivers, the correct installation sequence, which driver version is required,
and more.
Once the installation is done, launch miroINSTANT Video 5:
Start Premiere 5.1, click the load button in the settings dialog box and select
one of the miroVIDEO presets.
Important: If you do not use one of the presets supplied for your miroVIDEO
DC30 or change the Premiere 5 settings manually, then miroINSTANT Video 5
may not work properly!
*
Windows 95 / 98 only.
