Using the DC30 Board Under Windows 95/98
49
T
HE
DC30 series
CONTROL
The DC30 series Control tool offers several settings for the miroVIDEO DC30
series output. The DC30 series Control is automatically started, and is filed in
the System tray as a .
You cannot see changes you make with the DC30 series Control while a movie
is running. Any changes only take effect after you restart the playback
procedure.
1.
Click the icon in the System tray to open the DC30 series Control.
2.
Make the desired changes.
Standard
Allows you to manually determine the video standard for the outputs of the
miroVIDEO DC30 series:
PAL
NTSC
PAL M (Brazil)
PAL N (Argentina)
NTSC 4.43 MHz.
With miroVIDEO DC30 series no standard conversion is possible. That is
clips digitized and edited PAL video only be output in PAL format. The
same applies to NTSC.
The default selection for the pixel ratio “Automatic adaptation” enables an
automatic detection and setting of the playback standard as well. So, there
will be no need to set the standard manually.
