Using the DC30 Board Under Windows 95/98
57
Audio recording
The settings for recording audio are made in the Recording Control mode. To
start the Recording Control application, select the Settings menu from the
Playback Control window, then select the Properties and Record commands.
You can only select one device (internal or external) at any one time for
recording.
Record Control
The Record Control is the master control for adjusting the levels of both inputs.
Controlling the balance is not possible. To adjust the balance, use the balance
sliders of these inputs.
The level slider have an adjustment range from 0dB to +22 dB. Normally, place
the controller on its lowest setting (see figure above). However, you can
increase the setting to amplify particularly quiet sounds.
Internal
Lets you adjust the input level and the balance for the device you connected to
the internal miroVIDEO DC30 series audio input (such as the audio cable of a
CD-ROM drive or a sound board).
External
Lets you adjust the input level and the balance of the connected device (a VCR,
for example) with the miroVIDEO DC30 series board.
Mute
The Mute control box turns off the volume from the corresponding audio
sources (internal, external). Only one Mute control box can be activated at any
given time.
