52
miroVIDEO DC30 Series User´s Guide
Limiting the image quality and the amount of data only refers to the playback in
the window: the high quality of miroVIDEO DC30 series during video editing
and playback will not be affected.
Low resolution
If the described image interference still occur when the option Medium
resolution has been chosen, try the option Low resolution. Obviously, your
computer system is overcharged, probably it does not meet the requirements
of miroVIDEO DC30 series.
AVI Cache settings
miroAVI Cache is a software developed for playing back videos with
miroVIDEO DC30 series without jerkiness but with a synchronous lip
movement. In order to playback videos and to output them via the
miroVIDEO DC30 series, the videos must be in MJPG format.
miroAVI Cache is always activated, when miroINSTANT Video is used or
when it has been chosen in the MediaPlayer explicitly under Device.
Use always
This is the default setting.
In some Video for Windows applications the option Use always may cause
problems during playback. In this case, deactivate the check box.
Synchronized start
If the Synchronized start check box is activated and you start playing back a
video sequence with miroAVI Cache, a dialog box will appear as soon as the
cache is filled and prepared for immediate playback.
Click OK, and the playback will be started immediately and without any
jerks. This mode is especially appropriate for recording accurate video
material with a VCR. For that, first start the playback of the video with
miroVIDEO DC30 series, then, after the dialog box of the miroAVI Cache
has appeared, start recording with the VCR and click OK in the dialog box
at the same time.
The synchronized start can be deactivated, if you do not want to record the
played back video onto a tape. This might cause some jerks at the beginning
of the playback, but it avoids the dialog box each time you use the playback.
Default
The Default button restores all default settings.
