miroVIDEO Capture
73
Video
Under Video you can select the settings for your captured video clips:
Video standard
Here you can select the video standard: PAL, NTSC, SECAM, NTSC 4.43
(NTSC video signal, PAL color carrier), PAL M (Brazil) or PAL N (Argentina).
Depending on the installed Windows version, one video standard has been pre-
selected.
Frame resolution
Here you can select the output quality you want your final video to have: Full,
Half, Quarter.
−
Full
Select Full, if your computer is capable to handle the amount of data which
is being produced when capturing the full-screen image. Full means a
resolution of 768 x 576 (PAL / PAL N / SECAM) or 640 x 480 (NTSC /
NTSC 4.43 / PAL M).
−
Half
Select Half, if you want to reduce the amount of data when capturing video.
As the Half option skips every second horizontal line, the capture quality is
lower. Half results in a 384 x 576 (PAL / PAL N / SECAM) or a
320 x 480 (NTSC / NTSC 4.43 / PAL M) resolution.
−
Quarter
Select Quarter, if you want to reduce the amount of data considerably when
capturing video. As the Quarter option skips every second horizontal and
vertical line, the capture quality is considerably lower. Quarter results in a
384 x 288 (PAL / PAL N / SECAM) or 320 x 240 (NTSC / NTSC 4.43 /
PAL M) resolution.
−
TV cropping
If the TV cropping check box has been enabled, pixels will be cut off the
image edges (top, bottom, left, right). For many applications, these areas are
not visible and removing them will save some amount of data with no
degradation in quality.
