Technical Data
145
3.
Under Premiere, put the capture file on a different drive.
In Adobe Premiere, the drive used for recording is determined by the drive
entry for Adobe’s virtual memory.
In Adobe Premiere, this menu item is listed under the File menu and the
Properties and Virtual Driver commands.
General tips for error messages under Premiere 4.2
•
In the [CODEC] section of the PREM32.INI file, add the line:
Keepopen=MJPG
W
INDOWS
95 / W
INDOWS
98
Hardware not found during installation.
1. From the Start menu and the Settings command, open the Control Panel.
2.
Under System, select the Device Manager and the Sound, video- and game
controllers option.
3.
Delete the following entry if it exists:
PCI Multimedia Video device
miroVIDEO DC30 series, Motion JPEG Capture/CODEC board.
4.
Restart Windows 95/98.
The following message should appear during startup:
New hardware component detected!
Insert data medium.
If this message does not appear during startup, install the miroVIDEO DC30
series in a different PCI slot. If this still does not solve the problem, either
the miroVIDEO DC30 series is defective or the video board is having
problems with your system’s motherboard.
5.
Confirm with OK.
6.
Place the miroVIDEO DC30 series CD-ROM in your CD-ROM drive and
enter the drive identifier for your CD-ROM drive (for example,
D:\SETUP)
in the Windows command line.
7.
Click on OK.
8.
Restart the hardware test from the DC30 series Hardware test dialog box.
General crash or error function.
Make sure the miroVIDEO DC30 series driver has been completely installed in
Windows 95/98.
