10
miroVIDEO DC30 Series User´s Guide
Quick start
The following chapter is designed so that you can start using your miroVIDEO
DC30 series board immediately.
For more detailed installation instructions, please refer to the subsequent
chapters in the manual. Detailed configuration options are listed in the
appendix, beginning on page I.
Q
UICK INSTALLATION
Proceed as follows to install the miroVIDEO DC30 series hardware and
software:
Install Adobe Premiere.
;
Place the Adobe Premiere-CD-ROM in your CD-ROM drive.
;
If the installation program is not started automatically, select Run…
from the Start menu.
;
Depending on your drive, enter, for example:
e:\premiere\setup,
then click OK.
;
Follow the installation instructions on the screen.
Install the miroVIDEO DC30 series board.
;
Turn your computer and all peripherals off.
;
Remove the necessary cables.
;
Open the computer’s housing.
;
Remove the slot cover.
;
Insert the board into bus master PCI slot.
;
Reassemble your computer.
;
Reconnect all cables.
Connect video source(s) to the video input(s)
*
.
;
Connect video sources with composite outputs to the composite input
and/or connect video sources with S-VHS outputs to the
S-VHS input.
Connect a VCR/television to the video output
*
.
;
Connect the VCR/television to the appropriate video output (composite
or S-VHS).
*
For help with this, refer to the board layout on page 17.
