60
miroVIDEO DC30 Series User´s Guide
Standard
Here you select the video standard of a video source:
PAL
NTSC
SECAM.
miroVIDEO DC30 series does not convert between standards. That means if
you digitize PAL video, you must choose a PAL-Premiere preset and the result
will be output in PAL format by miroVIDEO DC30 series.
Pixel ratio
Lets you choose between Square and ITU-R.R601. For most projects, use
Square.
Video loopthrough
If you activate the Video loopthrough check box, the input video signal will be
directly transmitted to the output connectors of the miroVIDEO DC30 series
and will be output on a connected control monitor.
If your player is also your recording device, connected to the video input as
well as to the video output of the miroVIDEO DC30 series, deactivate the
Video loopthrough check box in order to avoid video feedback.
VCR stability
Please activate the VCR stability check box, when using as a player a VCR
instead of a camera.
Display
Allows you to modify the Brightness, the Contrast, the Saturation and the
Sharpness.
This will have an impact on the video signal during digitalization. If you want
to edit the unchanged video material, you need to set the sliders on the default
settings.
NTSC options
If you selected NTSC, you can select special NTSC options: Comb Filter is a
filter especially designed for NTSC which improves the composite signal
quality. You can only enable Comb Filter if you selected a composite input.
Enable the 4.43 MHz color carrier option, if your source offers this color
carrier. If there is no color in the preview or in the overlay, change the setting
for this option.
You can additionally change the NTSC Hue.
Default
