Pima Hunter-Pro 8144, Installation Manual

Page: 10 / 116

10 HUNTER-PRO Series
Hunter-Pro Series & Captain 8 Installation Guide
2.2 The control panel’s circuit
Diagram 1. The Hunter-Pro Series PCB
2.2.1 Terminals, connectors, jumpers & fuses
No. Terminal Description/Connected accessories
1.
ZONES Z1-Z8
8 dry contact detector inputs. Loops can have one or two EOL (End
of line) resistor supervision.
2.
(+V)/(-)/AGND

“+”: 12VDC power supply for detectors

“-”/AGND: Common
3.
KEY Input for momentary or ON/OFF key switches and remote controls
4.
SIRENS Ext.,
Int.
Terminals for connecting external and internal Sirens/horns. The
terminals are protected by automatic thermal fuses, F2, F3. See
more details in section ‎6.10.5, on page 69.
5.
RELAY Output for triggering gates, spotlights, etc.
6.
Smoke
Fire, Smoke & Anti-Mask detectors’ reset output. To manually reset
a detector, press [*] for 2 seconds
7.
KEYPAD
Input/output and power supply for keypads & expanders (BUS).
The terminals are:

'+'/'-': 13.8 VDC; F4 thermal fuse protects the terminals

IN/OUT: Data
8.
ALRM
Transistor output. By default, the output is switched to (-) when an
alarm is set off.
9.
ON/OFF
Transistor output. By default, the output is switched to (-) when the
system is armed.