Pima Hunter-Pro 8144, Installation Manual

Page: 66 / 116

66 Programming the System
Hunter-Pro Series & Captain 8 Installation Guide
Char. Parameter When setting to ‘+’ :
F Enable Fast Arm
Single-key (long press) arming is enabled. Options are:


[1] - Full mode;


[4] - “HOME 1” mode;


[7] - “HOME 2” mode
1 Cancel HOME1 Del No exit delay when arming to “HOME 1” mode
2 Cancel HOME2 Del No exit delay when arming to “HOME 2” mode
Z Disp. Alrm in ON Alarms will be displayed while the panel is armed
E EN-50131 In use in some countries
R Retrigger Opn.Zn Zones that are open over siren time, will re-trigger the alarm
until they are closed or the panel is disarmed; see also
parameter “B” in section ‎6.4.2, on page 50.
P Disp. Armed Part

(+): Armed partitions will be displayed in the “Scan Open
Zones” display mode.

(-): To display armed partitions momentarily (in the “Scan
Open Zones” mode only), press [#]
F Final door The exit delay terminates upon closing the final delayed zone
C Full remote cont

(+): Remote control in mode B is enabled; see section ‎1,
on page 76.

(-): Remote control in mode A is enabled
Remote control is not available in Captain 8
J Report W/L Jamm. Wireless jamming will be reported
A Part. AutoArming Auto arming per partitions is enabled 1
O Beep in disarm The external siren will beep twice when disarming the panel
(via a keypad)
6.8.3 Third screen
Par. Name When setting to ‘+’ :
S DC sirens EOL DC (only) sirens loops will be EOL resistor supervised for:

Cut, while the panel is disarmed;

Short, while the panel is armed
K Not in use -
1
Inactivity auto-arming is set in the User menu; see the User guide for details
SK
+-