Pima Hunter-Pro 8144, Installation Manual

Page: 55 / 116

Programming the System 55
Hunter-Pro Series & Captain 8 Installation Guide
6.5.4.1 Number of rings
Set the number of rings after which the panel will picks up calls. This does not affect
the GSM-200 calls.
To manually answer a call, enter the Master code and press [ENTR] twice.
To save, press [ENTR].
6.5.4.2 ACK waiting time
Set the ACK wating time of the PSTN and GSM channels. The max. waiting time for both
is 60 sec.
To save, press [ENTR]
6.5.4.3 Kissoff delay
Set the Kissoff wating time. This feature is useful for GSM communication faults.
The delay is in milliseconds and the number set is multiplied by 250. For example, setting the
delay to 7 means a delay of 7X250=1750ms.
To save, press [ENTR]
6.5.4.4 External line
Set an outside line access number if the telephone line is connected to a switchboard.
Press [*] repeatedly for the next characters: P for a short delay, ‘+’, ‘#’, ‘*’.
To save, press [ENTR]
6.5.4.5 PSTN prefix
Set up to 12 prefix digits. If External line number is set, the panel first dials that number, then
the PSTN prefix, then the phone number.
To save, press [ENTR]
6.5.4.6 Radio transmission and frames
No. of trans.: set the number of the radio re-transmissions. The fixed interval between each
transmission is 10 seconds.
Frames per Tr.: set the number of frames per transmission.
To save, press [ENTR].
6.5.4.7 Communication channels
Set the control panel’s main reporting channel: P-PSTN, G-GSM or N-IP (network).
If the panel cannot report via the main channel, it tries the others (if in use), while continuing
to try via the first one, until it succeeds.
PGN
+--