Pima Hunter-Pro 8144, Installation Manual

Page: 53 / 116

Programming the System 53
Hunter-Pro Series & Captain 8 Installation Guide
6.5.1.3 PSTN Test time and interval
Set the daily time and interval (in hrs.) for sending test events to the Monitoring Station. If
the default time 00:00 is left, the system will send the tests according to the interval, as soon
as you set it. The interval timer will start running when you press [ENTR].
Example: if the test time is set to 03:00 and the interval to 3 Hrs, test events will be sent
every 3 hours and everyday at 03:00.
To save, press [ENTR].
6.5.1.4 Radio test interval
Set the radio tests interval. See the previous sub-section for how-to. The daily interval time of
the radio is the same as the PSTN one.
To save, press [ENTR].
6.5.1.5 Account ID addition
To use 6 digit account numbers, set here the first 2 (hundreds of thousands). The number set
here (i.e., 560000) will be added to all the account numbers in all the partitions.
6.5.2 Account numbers
Set the PSTN (“Ph”) and Radio (“Rd”) account numbers. Each account is assigned to a partition.
16 partitions can be set in Hunter-Pro Series, with each carrying a different PSTN and radio
accounts. In Captain 8, only 4 partitions/accounts can be set.
If partitions are not in use, set only Account ID #1.
Note that if no account ID is set, no report will be sent to the Monitoring Station
6.5.3 Phone numbers
Set here up to 4 phone numbers of the Monitoring Station. If the control panel reports to two
Monitoring Stations (“Double report”), than phone numbers #1 & #2 will be of Monitoring
Station 1 and numbers #3 & #4 of Monitoring Station 2. To report under 2 account numbers
(“Split report”), see the next “Communication Options” section
To save, press [ENTR].
6.5.3.1 Calling process
The control panel tries to call the first number; if not answered, the next numbers are called.
Overall, 8 dialing attempts are made.