Pima Hunter-Pro 8144, Installation Manual

Page: 32 / 116

32 HUNTER-PRO Series
Hunter-Pro Series & Captain 8 Installation Guide
2. Set the "Audio control" (or any other) output type to trigger the outputs.
3. Set each output's partition/s in the “Part. For Out” screen. You must set a different
partition for each output, i.e., the same partition cannot trigger both messages.
4. Set the outputs' polarity ("P") to (-).
3.10.3 SMS-100
To connect the SMS-100 module to the control panel, see the next diagram and table.
Diagram 27. SMS-100 wiring diagram
SMS-100 Control Panel
P1-Yellow AUDIO IN
P2-Orange AUDIO OUT
3.10.4 GSM-200 cellular communicator
The GSM-200 cellular module can serve both as a main or backup communication channel.
It connects integrally at the control panel case. See the figure in section , on page .
See mounting guidelines in section ‎8.6, on page 83.
Figure 3. The GSM-200 PCB and mounting holes
SMS-100
Yellow
Control panel
Orange
TRANSMITTER
JP1
P
2
P
1
A
o
ut
A
in
JP
1
AUDIO OUT
AUDIO IN
GSM-200
Control panel case’s top side