Phytec phyCORE-i.MX 6, Hardware Manual

Page: 68 / 82

phyCORE
®
-i.MX 6 [PCM-058]
54 ©
PHYTEC Messtechnik GmbH 2016 L-808e_2
15.4 Utilizing the Camera Interfaces on a Carrier Board
On Phytec carrier boards the interfaces are used directly as parallel interface according to
the phyCAM-P standard (
Figure 13) and/or by converting the signals with an LVDS
deserializer as serial interface following the phyCAM-S+ standard ( Figure 14 ), or as
MIPI/CSI-2 interface.
Figure 13: Use of Parallel 0 (CSI0 of IPU#1) and Parallel 1 (CSI1 of IPU#2) as phyCAM-P interface
Figure 14: Use of Parallel 0 (CSI0 of IPU#1) and Parallel 1 (CSI1 of IPU#2) as phyCAM-S+ interface
More information on the Phytec camera interface standards phyCAM-P and phyCAM-S+ and
how to implement them on a custom carrier board can be found in the corresponding
manual L-748. The schematics of the phyBOARD-Mira i.MX 6 on which camera interface
Parallel 0 is brought out as phyCAM-S+ interface (LVDS) can also serve as reference design.